/ Shop Equipment / Hydraulic Bottle Jack ( Welded Type )
Product Name :
Hydraulic Bottle Jack 3 Ton ( Welded Type ).-
Product Specification :
Capacity: 3 Ton
Min. ~ Max. Height: 192~300mm
Lifting Height: 108mm
N.W./G.W.: 4.6/4.7kgs
Q'TY of 20'FT container: 5400pcs
Note :
1. Meet ANSI standard.
2. Heavy steel construction, the pressure cylinder oil reservoir and pump housing are welded to the hydraulic base. This forms one integral piece, stronger than threaded-type bottle jacks.
3. Pump piston is heat treated & hard chrome plated to prevent rusting and add extend life.
4. Load tested to 150% capacity, easy to repair.
5. Chrome plated lifting ram on all capacities for extended life.
6. Operates in vertical, angled, or horizontal position.
7. Equipped with internal load limiting device. The automatic by-pass system prevents ram over-travel. This prevents excessive wear that causes loss of pressure.
Electric Hydraulic Pump
*Low amp draw on start up -110V 15Amps
*Fewer moving parts than a gear pump
*Less noise under load - below 80dBA
*More contaminant resistant
*60cu in of flow at 10,000psi. External relief valve adjustable down to 1,000psi.
*Will be available in 1/2
Hydraulic Industrial Toe Jack 25Ton
*Toe Capacity: 25-Ton
*Min~Max Toe Height: 58~273mm
*Min~Max Head Height: 505~720mm
*Max. Lever Force: 40kgs
*Net Weight: 102.0kgs
Hydraulic Industrial Toe Jack 10Ton
*Toe Capacity: 10-Ton
*Min~Max Toe Height: 30~260mm
*Min~Max Head Height: 420~650mm
*Max. Lever Force: 40kgs
*Net Weight: 35.0kgs
Taipei Office:3F. No. 63-1, Sec. 1, Chang-An East Rd.,Taipei, Taiwan (104) R.O.C Tel: +886-2-25212385 (Rep.) Fax: +886-2-25676987
E-Mail: enquiry@jiameei.com.tw
Chia-Yih Factory:No. 5 Chung-Hsin Rd., Chia-Tai Industrial Park, Chia-Yih Hsien Taiwan (612) Tel: +886-5-2371137 (Rep.) Fax: +886-5-2376981
E-Mail: contact@jiameei.com.tw
Shanghai Factory:No. 353, Hsing Nan Rd.,Kao Chiao Pu Tung, Shainghai, Chian P.R.C. Tel: +86-21-50405886 (Rep.) Fax: -86-21-50405117
E-Mail: info@jiameei.com.tw