|
|
|
|
|
|
|
|
|
|
|
JMCJ-8000CSP |
|
|
|
Product
Name : |
4 Post Automotive Lift (Car Stacker).- |
Product
Specification
: |
The JMCJ-8000CSP is a 4 Post Lift designed with car collectors and those looking to add parking space to their garage in mind.
A. 110V OR 220V Power Unit: With the JMCJ-8000CSP you get to choose what type of Power Unit works best for you and your application!
B. Single Point Lock Release: The Lock Release design on our 4-Post lifts makes disengaging the safety locks a fast, simple, ONE Step process!
C. Car Stop Plates: 4 Car Stop Plates are included to allow you to secure vehicles from the front and rear, preventing accidents and increasing safety!
D. Steel Jack Tray: A sliding, Heavy Duty Jack Tray is included to provide a platform for lifting vehicles off of the Runways as needed for maintenance. The Steel Jack Tray also works well as a drain pan.
E. Heavy Duty Steel Aircraft Cables: Our Portable 4-Post Lifts utilize a Heavy-Duty Braided Steel Aircraft Cable driven design and use only one Hydraulic Cylinder.
F. Steel Block Safety Latch Locking System: The Locking System on the JMCJ-8000CSP uses Heavy Duty Steel Components for maximum safety!
G. 37" Approach Ramps: With 37" Drive-On Approach Ramps and Diamond Plate design, getting vehicles onto this lift is easy! This provides a low angle approach and means that Low Profile vehicles are NO Problem!
H. Complete Polyurethane Coated Caster Kit: The Included Polyurethane Coated Caster Kits provide smooth rolling action when moving this lift.
I. 3 Drip Trays: The 3 Included Drip Trays with the JMCJ-8000CSP help collect waste oil and while also helping to protect the vehicle parked underneath!
|
Note
: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JMEP-154-3M2 |
Electric Hydraulic Pump |
|
|
|
*Low amp draw on start up -110V 15Amps
*Fewer moving parts than a gear pump
*Less noise under load - below 80dBA
*More contaminant resistant
*60cu in of flow at 10,000psi. External relief valve adjustable down to 1,000psi.
*Will be available in 1/2 |
|
|
|
|
|
|
|
|
|
|
|
JMSHL-25L |
Hydraulic Industrial Toe Jack 25Ton |
|
|
|
*Toe Capacity: 25-Ton
*Min~Max Toe Height: 58~273mm
*Min~Max Head Height: 505~720mm
*Max. Lever Force: 40kgs
*Net Weight: 102.0kgs |
|
|
|
|
|
|
|
|
|
|
|
JMSHL-10L |
Hydraulic Industrial Toe Jack 10Ton |
|
|
|
*Toe Capacity: 10-Ton
*Min~Max Toe Height: 30~260mm
*Min~Max Head Height: 420~650mm
*Max. Lever Force: 40kgs
*Net Weight: 35.0kgs |
|
|
|
|
|
|
|
|
|
|
|
Taipei
Office:3F. No. 63-1, Sec. 1, Chang-An East Rd.,Taipei,
Taiwan (104) R.O.C Tel: +886-2-25212385 (Rep.) Fax:
+886-2-25676987
E-Mail: enquiry@jiameei.com.tw |
|
Chia-Yih
Factory:No. 5 Chung-Hsin Rd., Chia-Tai Industrial
Park, Chia-Yih Hsien Taiwan (612) Tel: +886-5-2371137
(Rep.) Fax: +886-5-2376981
E-Mail: contact@jiameei.com.tw
|
|
Shanghai
Factory:No. 353, Hsing Nan Rd.,Kao Chiao Pu Tung,
Shainghai, Chian P.R.C. Tel: +86-21-50405886 (Rep.)
Fax: -86-21-50405117
E-Mail: info@jiameei.com.tw
|
|
|
|