|
|
|
|
|
|
|
|
|
|
|
JMCJ-14000FPARCB |
|
|
|
Product
Name : |
Heavy-Duty 4 Post Alignment Lift.- |
Product
Specification
: |
The JMCJ-14000FPARCB 4 Post Alignment Lift is designed for use in alignment service.
A. Fully Functional Alignment Lift! This 4 Post Lift INCLUDES: TWO Radius Gauges, TWO Rear Wheel Slip Plates!
B. Easy Adjustable Leveling on Each Column: Alignment lifts require level runways, the JMCJ-14000FPARCB's columns can be individually adjusted to get the lift absolutely level.
C. Perfect For Servicing Heavy Vehicles! The JMCJ-14000FPARCB is designed for high volume shops, lifting large vehicles, including heavy trucks and vans.
D. Wide Construction For Large Trucks: A wide drive through width, 20" wide runways, and heavy 14000 LBS. capacity, the JMCJ-14000FPARCB is made to handle large fleet vehicles.
E. 6 Position Single Point Air Lock Release Safety Lock System: Wide range of secure locking points allow for safe operation w/ air powered single point lock release.
F. Removable Stop Plates: 4 Removable Stop Plates are included to allow you to secure vehicles from the front and rear, preventing accidents and increasing safety!
G. Adjustable 20" Wide Runways: Adjustable Runway allows the JMCJ-14000FPARCB to lift a wide range of vehicles.
H. Heavy Duty Leaf Chain: High tensile strength chain for durability and longer operational life.
I. 37" Approach Ramps: With 37" Drive-On Approach Ramps and Diamond Plate design, getting vehicles onto this lift is easy! Low Profile vehicles are NO Problem!
J. Powerful 220V Power Unit & Large hydraulic Cylinder: The powerful hydraulic system in the JMCJ-14000FPARCB is built for durability & reliability. (110V is available)
|
Note
: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JMEP-154-3M2 |
Electric Hydraulic Pump |
|
|
|
*Low amp draw on start up -110V 15Amps
*Fewer moving parts than a gear pump
*Less noise under load - below 80dBA
*More contaminant resistant
*60cu in of flow at 10,000psi. External relief valve adjustable down to 1,000psi.
*Will be available in 1/2 |
|
|
|
|
|
|
|
|
|
|
|
JMSHL-25L |
Hydraulic Industrial Toe Jack 25Ton |
|
|
|
*Toe Capacity: 25-Ton
*Min~Max Toe Height: 58~273mm
*Min~Max Head Height: 505~720mm
*Max. Lever Force: 40kgs
*Net Weight: 102.0kgs |
|
|
|
|
|
|
|
|
|
|
|
JMSHL-10L |
Hydraulic Industrial Toe Jack 10Ton |
|
|
|
*Toe Capacity: 10-Ton
*Min~Max Toe Height: 30~260mm
*Min~Max Head Height: 420~650mm
*Max. Lever Force: 40kgs
*Net Weight: 35.0kgs |
|
|
|
|
|
|
|
|
|
|
|
Taipei
Office:3F. No. 63-1, Sec. 1, Chang-An East Rd.,Taipei,
Taiwan (104) R.O.C Tel: +886-2-25212385 (Rep.) Fax:
+886-2-25676987
E-Mail: enquiry@jiameei.com.tw |
|
Chia-Yih
Factory:No. 5 Chung-Hsin Rd., Chia-Tai Industrial
Park, Chia-Yih Hsien Taiwan (612) Tel: +886-5-2371137
(Rep.) Fax: +886-5-2376981
E-Mail: contact@jiameei.com.tw
|
|
Shanghai
Factory:No. 353, Hsing Nan Rd.,Kao Chiao Pu Tung,
Shainghai, Chian P.R.C. Tel: +86-21-50405886 (Rep.)
Fax: -86-21-50405117
E-Mail: info@jiameei.com.tw
|
|
|
|